Immediate#

SCPI Command :

INITiate:SEQuencer:IMMediate
Commands in total: 1
Subgroups: 0
Direct child commands: 1
perform ( ) → None
perform_with_opc ( opc_timeout_ms: int = -1 ) → None
# INITiate:SEQuencer:IMMediate
driver.initiate.sequencer.immediate.perform()
driver.initiate.sequencer.immediate.perform_with_opc(opc_timeout_ms = 3000)

Starts a new sequence of measurements by the Sequencer. Its effect is similar to the method RsFsw.applications.k10Xlte.initiate.immediate.perform() command used for a single measurement. Before this command can be executed, the Sequencer must be activated (see method RsFsw.system.sequencer.set() ) .

perform_with_opc() does the same as perform(), but waits for the operation to complete before continuing further. Use the RsFsw.utilities.opc_timeout to set the timeout value.

Parameters:

opc_timeout_ms – Maximum time to wait in milliseconds, valid only for this call.