Refresh

SCPI Command :

INITiate:REFResh

Commands in total: 1

Subgroups: 0

Direct child commands: 1

set(opc_timeout_ms: int = -1) → None

# INITiate:REFResh
driver.initiate.refresh.set()

Updates the current measurement results to reflect the current measurement settings. No new I/Q data is captured. Thus, measurement settings apply to the I/Q data currently in the capture buffer. The command applies exclusively to I/Q measurements. It requires I/Q data.

Parameters:

opc_timeout_ms – Maximum time to wait in milliseconds, valid only for this call.