IfPower

SCPI Command :

TRIGger[:SEQuence]:LEVel:IFPower

class IfPowerCls

IfPower commands group definition. 1 total commands, 0 Subgroups, 1 group commands

get() → float

# SCPI: TRIGger[:SEQuence]:LEVel:IFPower
value: float = driver.applications.k9X11Ad.trigger.sequence.level.ifPower.get()

Defines the power level at the third intermediate frequency that must be exceeded to cause a trigger event. Note that any RF attenuation or preamplification is considered when the trigger level is analyzed. If defined, a reference level offset is also considered. For compatibility reasons, this command is also available for the ‘Baseband Power’ trigger source when using the ‘Analog Baseband’ interface. For details on the trigger settings, see ‘Trigger Source’.

return

level: No help available

set(level: float) → None

# SCPI: TRIGger[:SEQuence]:LEVel:IFPower
driver.applications.k9X11Ad.trigger.sequence.level.ifPower.set(level = 1.0)

Defines the power level at the third intermediate frequency that must be exceeded to cause a trigger event. Note that any RF attenuation or preamplification is considered when the trigger level is analyzed. If defined, a reference level offset is also considered. For compatibility reasons, this command is also available for the ‘Baseband Power’ trigger source when using the ‘Analog Baseband’ interface. For details on the trigger settings, see ‘Trigger Source’.

param level

For details on available trigger levels and trigger bandwidths, see the specifications document. Unit: DBM