Max

SCPI Command :

[SENSe]:DEMod:FORMat:BANalyze:SYMBols:MAX

Commands in total: 1

Subgroups: 0

Direct child commands: 1

get() → float

# [SENSe]:DEMod:FORMat:BANalyze:SYMBols:MAX
value: float = driver.applications.k91Wlan.sense.demod.formatPy.banalyze.symbols.max.get()

For IEEE 802.11a, ac, g (OFDM) , j, n, p signals only: If the method RsFsw.applications.k91Wlan.sense.demod.formatPy.banalyze.symbols.equal.set() command is set to false, this command specifies the maximum number of payload symbols allowed for a PPDU to take part in measurement analysis. The number of payload symbols is defined as the uncoded bits including service and tail bits. If the method RsFsw.applications.k91Wlan.sense.demod.formatPy.banalyze.symbols.equal.set() command has been set to true, then this command has no effect.

Returns:

num_data_symbols: integer

set(num_data_symbols: float) → None

# [SENSe]:DEMod:FORMat:BANalyze:SYMBols:MAX
driver.applications.k91Wlan.sense.demod.formatPy.banalyze.symbols.max.set(num_data_symbols = 1.0)

For IEEE 802.11a, ac, g (OFDM) , j, n, p signals only: If the method RsFsw.applications.k91Wlan.sense.demod.formatPy.banalyze.symbols.equal.set() command is set to false, this command specifies the maximum number of payload symbols allowed for a PPDU to take part in measurement analysis. The number of payload symbols is defined as the uncoded bits including service and tail bits. If the method RsFsw.applications.k91Wlan.sense.demod.formatPy.banalyze.symbols.equal.set() command has been set to true, then this command has no effect.

Parameters:

num_data_symbols – integer