Tbeamforming

SCPI Command :

CONFigure:WLAN:RUConfig:SEGMent<seg>:CHANnel<ch>:RULocation<cf>:USER<mu>:TBEamforming
Commands in total: 1
Subgroups: 0
Direct child commands: 1
get(segment=Segment.Default, channel=Channel.Default, ruAllocationIx=RuAllocationIx.Default, userIx=UserIx.Default) → float[source]
# CONFigure:WLAN:RUConfig:SEGMent<seg>:CHANnel<ch>:RULocation<cf>:USER<mu>:TBEamforming
value: float = driver.applications.k91Wlan.configure.wlan.ruConfig.segment.channel.rulocation.user.tbeamforming.get(segment = repcap.Segment.Default, channel = repcap.Channel.Default, ruAllocationIx = repcap.RuAllocationIx.Default, userIx = repcap.UserIx.Default)

Defines whether transmit beamforming is used.

Parameters:

  • segment – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Segment’)

  • channel – optional repeated capability selector. Default value: Ch1 (settable in the interface ‘Channel’)

  • ruAllocationIx – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Rulocation’)

  • userIx – optional repeated capability selector. Default value: Ix1 (settable in the interface ‘User’)

Returns:

state: ON | OFF | 0 | 1 OFF | 0 No beamforming applied ON | 1 Beamforming is applied

set(state: float, segment=Segment.Default, channel=Channel.Default, ruAllocationIx=RuAllocationIx.Default, userIx=UserIx.Default) → None[source]
# CONFigure:WLAN:RUConfig:SEGMent<seg>:CHANnel<ch>:RULocation<cf>:USER<mu>:TBEamforming
driver.applications.k91Wlan.configure.wlan.ruConfig.segment.channel.rulocation.user.tbeamforming.set(state = 1.0, segment = repcap.Segment.Default, channel = repcap.Channel.Default, ruAllocationIx = repcap.RuAllocationIx.Default, userIx = repcap.UserIx.Default)

Defines whether transmit beamforming is used.

Parameters:

  • state – ON | OFF | 0 | 1 OFF | 0 No beamforming applied ON | 1 Beamforming is applied

  • segment – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Segment’)

  • channel – optional repeated capability selector. Default value: Ch1 (settable in the interface ‘Channel’)

  • ruAllocationIx – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Rulocation’)

  • userIx – optional repeated capability selector. Default value: Ix1 (settable in the interface ‘User’)