Antenna<Antenna>

RepCap Settings

# Range: Nr1 .. Nr32
rc = driver.applications.k91Wlan.configure.wlan.antMatrix.antenna.repcap_antenna_get()
driver.applications.k91Wlan.configure.wlan.antMatrix.antenna.repcap_antenna_set(repcap.Antenna.Nr1)

SCPI Command :

CONFigure:WLAN:ANTMatrix:ANTenna<ant>

class AntennaCls[source]

Antenna commands group definition. 1 total commands, 0 Subgroups, 1 group commands Repeated Capability: Antenna, default value after init: Antenna.Nr1

get(antenna=Antenna.Default) → RsFsw.enums.AntennaA[source]

# SCPI: CONFigure:WLAN:ANTMatrix:ANTenna<ant>
value: enums.AntennaA = driver.applications.k91Wlan.configure.wlan.antMatrix.antenna.get(antenna = repcap.Antenna.Default)

This remote control command specifies the antenna assignment of the receive path.

param antenna

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Antenna’)

return

receiver_antenna: ANTenna1 | ANTenna2 | ANTenna3 | ANTenna4 | ANTenna5 | ANTenna6 | ANTenna7 | ANTenna8 | ANT1 | ANT2 | ANT3 | ANT4 | ANT5 | ANT6 | ANT7 | ANT8 Antenna assignment of the receiver path

set(receiver_antenna: RsFsw.enums.AntennaA, antenna=Antenna.Default) → None[source]

# SCPI: CONFigure:WLAN:ANTMatrix:ANTenna<ant>
driver.applications.k91Wlan.configure.wlan.antMatrix.antenna.set(receiver_antenna = enums.AntennaA.ANT1, antenna = repcap.Antenna.Default)

This remote control command specifies the antenna assignment of the receive path.

param receiver_antenna

ANTenna1 | ANTenna2 | ANTenna3 | ANTenna4 | ANTenna5 | ANTenna6 | ANTenna7 | ANTenna8 | ANT1 | ANT2 | ANT3 | ANT4 | ANT5 | ANT6 | ANT7 | ANT8 Antenna assignment of the receiver path

param antenna

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Antenna’)

Cloning the Group

# Create a clone of the original group, that exists independently
group2 = driver.applications.k91Wlan.configure.wlan.antMatrix.antenna.clone()