SwapIq

SCPI Command :

[SENSe]:SWAPiq
class SwapIqCls[source]

SwapIq commands group definition. 1 total commands, 0 Subgroups, 1 group commands

get() bool[source]
# SCPI: [SENSe]:SWAPiq
value: bool = driver.applications.k70Vsa.sense.swapIq.get()

Defines whether or not the recorded I/Q pairs should be swapped (I<->Q) before being processed. Swapping I and Q inverts the sideband. This is useful if the DUT interchanged the I and Q parts of the signal; then the FSW can do the same to compensate for it. For GSM measurements: Try this function if the TSC can not be found.

return

state: ON | 1 I and Q signals are interchanged Inverted sideband, Q+j*I OFF | 0 I and Q signals are not interchanged Normal sideband, I+j*Q

set(state: bool) None[source]
# SCPI: [SENSe]:SWAPiq
driver.applications.k70Vsa.sense.swapIq.set(state = False)

Defines whether or not the recorded I/Q pairs should be swapped (I<->Q) before being processed. Swapping I and Q inverts the sideband. This is useful if the DUT interchanged the I and Q parts of the signal; then the FSW can do the same to compensate for it. For GSM measurements: Try this function if the TSC can not be found.

param state

ON | 1 I and Q signals are interchanged Inverted sideband, Q+j*I OFF | 0 I and Q signals are not interchanged Normal sideband, I+j*Q