Source

SCPI Command :

OUTPut<up>:IF[:SOURce]

class SourceCls

Source commands group definition. 1 total commands, 0 Subgroups, 1 group commands

get(outputConnector=OutputConnector.Default) → RsFsw.enums.Source

# SCPI: OUTPut<up>:IF[:SOURce]
value: enums.Source = driver.applications.k70Vsa.output.ifreq.source.get(outputConnector = repcap.OutputConnector.Default)

Defines the type of signal available at one of the output connectors of the FSW. For restrictions and more information see ‘IF and video signal output’.

param outputConnector

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Output’)

return

source: IF The measured IF value is available at the IF/VIDEO/DEMOD output connector. The frequency at which the IF value is provided is defined using the method RsFsw.Applications.K9x_11ad.Output.Ifreq.IfFrequency.set command. IF2 The measured IF value is available at the ‘IF OUT 2 GHz/ IF OUT 5 GHz’ output connector at a frequency of 2 GHz. This setting is only available if the ‘IF OUT 2 GHz/ IF OUT 5 GHz’ connector or the optional 2 GHz / 5 GHz bandwidth extension (FSW-B2000/B5000) is available. It is automatically set if the optional 2 GHz / 5 GHz bandwidth extension (FSW-B2000/B5000) is installed and active. For details see ‘Basics on the R&S FSW bandwidth extensions (R&S FSW-B2000/B5000 options) ‘. VIDeo The displayed video signal (i.e. the filtered and detected IF signal, 200mV) is available at the IF/VIDEO/DEMOD output connector. This setting is required to provide demodulated audio frequencies at the output.

set(source: RsFsw.enums.Source, outputConnector=OutputConnector.Default) → None

# SCPI: OUTPut<up>:IF[:SOURce]
driver.applications.k70Vsa.output.ifreq.source.set(source = enums.Source.AM, outputConnector = repcap.OutputConnector.Default)

Defines the type of signal available at one of the output connectors of the FSW. For restrictions and more information see ‘IF and video signal output’.

param source

IF The measured IF value is available at the IF/VIDEO/DEMOD output connector. The frequency at which the IF value is provided is defined using the method RsFsw.Applications.K9x_11ad.Output.Ifreq.IfFrequency.set command. IF2 The measured IF value is available at the ‘IF OUT 2 GHz/ IF OUT 5 GHz’ output connector at a frequency of 2 GHz. This setting is only available if the ‘IF OUT 2 GHz/ IF OUT 5 GHz’ connector or the optional 2 GHz / 5 GHz bandwidth extension (FSW-B2000/B5000) is available. It is automatically set if the optional 2 GHz / 5 GHz bandwidth extension (FSW-B2000/B5000) is installed and active. For details see ‘Basics on the R&S FSW bandwidth extensions (R&S FSW-B2000/B5000 options) ‘. VIDeo The displayed video signal (i.e. the filtered and detected IF signal, 200mV) is available at the IF/VIDEO/DEMOD output connector. This setting is required to provide demodulated audio frequencies at the output.

param outputConnector

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Output’)