State

SCPI Command :

INPut:GAIN:STATe

class StateCls

State commands group definition. 1 total commands, 0 Subgroups, 1 group commands

get() → bool

# SCPI: INPut:GAIN:STATe
value: bool = driver.applications.k6Pulse.inputPy.gain.state.get()

Turns the internal preamplifier on and off. It requires the optional preamplifier hardware. Note that if an optional external preamplifier is activated, the internal preamplifier is automatically disabled, and vice versa. Is not available for input from the optional ‘Digital Baseband’ interface. For FSW 8 or 13 models, the preamplification is defined by method RsFsw.Applications.K10x_Lte.InputPy.Gain.Value.set. For FSW 26 or higher models, the input signal is amplified by 30 dB if the preamplifier is activated. If option R&S FSW-B22 is installed, the preamplifier is only active below 7 GHz. If option R&S FSW-B24 is installed, the preamplifier is active for all frequencies.

return

state: ON | OFF | 0 | 1 OFF | 0 Switches the function off ON | 1 Switches the function on

set(state: bool) → None

# SCPI: INPut:GAIN:STATe
driver.applications.k6Pulse.inputPy.gain.state.set(state = False)

Turns the internal preamplifier on and off. It requires the optional preamplifier hardware. Note that if an optional external preamplifier is activated, the internal preamplifier is automatically disabled, and vice versa. Is not available for input from the optional ‘Digital Baseband’ interface. For FSW 8 or 13 models, the preamplification is defined by method RsFsw.Applications.K10x_Lte.InputPy.Gain.Value.set. For FSW 26 or higher models, the input signal is amplified by 30 dB if the preamplifier is activated. If option R&S FSW-B22 is installed, the preamplifier is only active below 7 GHz. If option R&S FSW-B24 is installed, the preamplifier is active for all frequencies.

param state

ON | OFF | 0 | 1 OFF | 0 Switches the function off ON | 1 Switches the function on