Limit

SCPI Command :

CALCulate<n>:TABLe:PHASe:PPPHase:LIMit

class LimitCls

Limit commands group definition. 2 total commands, 1 Subgroups, 1 group commands

class LimitStruct

Response structure. Fields:

• Lower_Limit: float: Lower limit of the valid value range. Unit: S

• Upper_Limit: float: Upper limit of the valid value range. Unit: S

get(window=Window.Default) → LimitStruct

# SCPI: CALCulate<n>:TABLe:PHASe:PPPHase:LIMit
value: LimitStruct = driver.applications.k6Pulse.calculate.table.phase.ppPhase.limit.get(window = repcap.Window.Default)

Defines the valid value range for the limit check for the selected parameter if limit check is active (CALCulate<n>:TABLe:<ParameterGroup>:<Parameter>:LIMit:STATeON) . Commands for the parameter group <TSIDelobe> are only available if the additional option FSW-K6S is installed. For details on the individual parameters see ‘Pulse parameters’.

param window

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Calculate’)

return

structure: for return value, see the help for LimitStruct structure arguments.

set(lower_limit: float, upper_limit: float, window=Window.Default) → None

# SCPI: CALCulate<n>:TABLe:PHASe:PPPHase:LIMit
driver.applications.k6Pulse.calculate.table.phase.ppPhase.limit.set(lower_limit = 1.0, upper_limit = 1.0, window = repcap.Window.Default)

Defines the valid value range for the limit check for the selected parameter if limit check is active (CALCulate<n>:TABLe:<ParameterGroup>:<Parameter>:LIMit:STATeON) . Commands for the parameter group <TSIDelobe> are only available if the additional option FSW-K6S is installed. For details on the individual parameters see ‘Pulse parameters’.

param lower_limit

Lower limit of the valid value range. Unit: S

param upper_limit

Upper limit of the valid value range. Unit: S

param window

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Calculate’)

Cloning the Group

# Create a clone of the original group, that exists independently
group2 = driver.applications.k6Pulse.calculate.table.phase.ppPhase.limit.clone()

Subgroups

• State