End

SCPI Command :

CALCulate<n>:CHRDetection:FREQuency:OFFSet:END

class EndCls

End commands group definition. 1 total commands, 0 Subgroups, 1 group commands

get(window=Window.Default) → float

# SCPI: CALCulate<n>:CHRDetection:FREQuency:OFFSet:END
value: float = driver.applications.k60Transient.calculate.chrDetection.frequency.offset.end.get(window = repcap.Window.Default)

Defines the end of the measurement range for frequency results as an offset in seconds from the chirp end. This command is only available if the reference is EDGE (see method RsFsw.Applications.K60_Transient.Calculate.ChrDetection.Frequency. Reference.set) . For details on the measurement range parameters see ‘Measurement range’.

param window

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Calculate’)

return

time: Unit: S

set(time: float, window=Window.Default) → None

# SCPI: CALCulate<n>:CHRDetection:FREQuency:OFFSet:END
driver.applications.k60Transient.calculate.chrDetection.frequency.offset.end.set(time = 1.0, window = repcap.Window.Default)

Defines the end of the measurement range for frequency results as an offset in seconds from the chirp end. This command is only available if the reference is EDGE (see method RsFsw.Applications.K60_Transient.Calculate.ChrDetection.Frequency. Reference.set) . For details on the measurement range parameters see ‘Measurement range’.

param time

Unit: S

param window

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Calculate’)