RfPower

SCPI Command :

TRIGger[:SEQuence]:LEVel:RFPower
class RfPowerCls[source]

RfPower commands group definition. 1 total commands, 0 Subgroups, 1 group commands

get() float[source]
# SCPI: TRIGger[:SEQuence]:LEVel:RFPower
value: float = driver.applications.k50Spurious.trigger.sequence.level.rfPower.get()

Defines the power level the RF input must exceed to cause a trigger event. Note that any RF attenuation or preamplification is considered when the trigger level is analyzed. If defined, a reference level offset is also considered. The input signal must be between 500 MHz and 8 GHz.

return

level: No help available

set(level: float) None[source]
# SCPI: TRIGger[:SEQuence]:LEVel:RFPower
driver.applications.k50Spurious.trigger.sequence.level.rfPower.set(level = 1.0)

Defines the power level the RF input must exceed to cause a trigger event. Note that any RF attenuation or preamplification is considered when the trigger level is analyzed. If defined, a reference level offset is also considered. The input signal must be between 500 MHz and 8 GHz.

param level

For details on available trigger levels and trigger bandwidths, see the specifications document. Unit: DBM