State

SCPI Command :

CALCulate<n>:UNCertainty:PREamp:STATe

Commands in total: 1

Subgroups: 0

Direct child commands: 1

get(window=Window.Default) → bool

# CALCulate<n>:UNCertainty:PREamp:STATe
value: bool = driver.applications.k30NoiseFigure.calculate.uncertainty.preamp.state.get(window = repcap.Window.Default)

Includes or excludes an external preamplifier from the uncertainty calculation. If the test setup uses an external preamplifier, you also have to define its ‘noise figure’ and ‘gain’ values.

Parameters:

window – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Calculate’)

Returns:

state: ON | OFF | 1 | 0

set(state: bool, window=Window.Default) → None

# CALCulate<n>:UNCertainty:PREamp:STATe
driver.applications.k30NoiseFigure.calculate.uncertainty.preamp.state.set(state = False, window = repcap.Window.Default)

Includes or excludes an external preamplifier from the uncertainty calculation. If the test setup uses an external preamplifier, you also have to define its ‘noise figure’ and ‘gain’ values.

Parameters:

• state – ON | OFF | 1 | 0

• window – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Calculate’)