Hot#

SCPI Command :

CALCulate<n>:UNCertainty:ENR:UNCertainty:HOT
Commands in total: 1
Subgroups: 0
Direct child commands: 1
get ( window=Window.Default ) → float
set ( uncertainty: float, window=Window.Default ) → None
# CALCulate<n>:UNCertainty:ENR:UNCertainty:HOT
# get:
value: float = driver.applications.k30NoiseFigure.calculate.uncertainty.enr.uncertainty.hot.get(window = repcap.Window.Default)
# set:
driver.applications.k30NoiseFigure.calculate.uncertainty.enr.uncertainty.hot.set(uncertainty = 1.0, window = repcap.Window.Default)

Defines the uncertainty of a resistor. If the noise sources during calibration and measurement are different, the command defines the uncertainty of the measurement noise source.

Parameters:
  • uncertainty – Hot temperature uncertainty value of the noise source. Refer to the specifications document of the noise source to determine its uncertainty.

  • window – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Calculate’)