Impedance#

SCPI Command :

INPut:IMPedance
Commands in total: 1
Subgroups: 0
Direct child commands: 1
get ( ) → int
set ( impedance: int ) → None
# INPut:IMPedance
# get:
value: int = driver.applications.k17Mcgd.inputPy.impedance.get()
# set:
driver.applications.k17Mcgd.inputPy.impedance.set(impedance = 1)

Selects the nominal input impedance of the RF input. In some applications, only 50 Ω are supported. For input from the Analog Baseband interface, use the method RsFsw.inputPy.iq.impedance.set() command.

Parameters:

impedance – 50 | 75

  • numeric value: User-defined impedance from 50 Ohm to 100000000 Ohm (=100 MOhm) User-defined values are only available for the Spectrum application, the I/Q Analyzer, and some optional applications.(In MSRA mode, primary only)