Holdoff

SCPI Command :

[SENSe]:SWEep:EGATe:HOLDoff

Commands in total: 1

Subgroups: 0

Direct child commands: 1

get() → float

# [SENSe]:SWEep:EGATe:HOLDoff
value: float = driver.applications.k14Xnr5G.sense.sweep.egate.holdoff.get()

Defines the delay time between the gate signal and the continuation of the measurement. Note: If you perform gated measurements in combination with the IF Power trigger, the FSW ignores the holding time for frequency sweep, FFT sweep, zero span and I/Q mode measurements.

set(delay: float) → None

# [SENSe]:SWEep:EGATe:HOLDoff
driver.applications.k14Xnr5G.sense.sweep.egate.holdoff.set(delay = 1.0)

Defines the delay time between the gate signal and the continuation of the measurement. Note: If you perform gated measurements in combination with the IF Power trigger, the FSW ignores the holding time for frequency sweep, FFT sweep, zero span and I/Q mode measurements.

Parameters:

delay – Range: 0 s to 30 s, Unit: S