Mode

SCPI Command :

[SENSe]:POWer:ACHannel:GAP<gap>:MODE
class ModeCls[source]

Mode commands group definition. 1 total commands, 0 Subgroups, 1 group commands

get(gapChannel=GapChannel.Default) RsFsw.enums.AutoManualMode[source]
# SCPI: [SENSe]:POWer:ACHannel:GAP<gap>:MODE
value: enums.AutoManualMode = driver.applications.k14Xnr5G.sense.power.achannel.gap.mode.get(gapChannel = repcap.GapChannel.Default)

Defines how gap channels are configured.

param gapChannel

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Gap’)

return

mode: AUTO | MANual AUTO In ‘Auto’ mode, upper and lower gap channels are configured identically, so only two channels need to be configured (gap 1, gap 2) . Gap channels are configured identically for all gaps, if more than two sub blocks are defined. Depending on the defined minimum gap size, the actual number of evaluated gap channels is determined automatically. See also [SENSe:]POWer:ACHannel:GAPgap[:AUTO]:MSIZe. MANual In ‘Manual’ mode, up to four channels can be configured individually for each gap. Active gap channels are always evaluated, regardless of the gap size. See also [SENSe:]POWer:ACHannel:GCHannel[:STATe]:GAPgap:MANual:LOWer and [SENSe:]POWer:ACHannel:GCHannel[:STATe]:GAPgap:MANual:UPPer.

set(mode: RsFsw.enums.AutoManualMode, gapChannel=GapChannel.Default) None[source]
# SCPI: [SENSe]:POWer:ACHannel:GAP<gap>:MODE
driver.applications.k14Xnr5G.sense.power.achannel.gap.mode.set(mode = enums.AutoManualMode.AUTO, gapChannel = repcap.GapChannel.Default)

Defines how gap channels are configured.

param mode

AUTO | MANual AUTO In ‘Auto’ mode, upper and lower gap channels are configured identically, so only two channels need to be configured (gap 1, gap 2) . Gap channels are configured identically for all gaps, if more than two sub blocks are defined. Depending on the defined minimum gap size, the actual number of evaluated gap channels is determined automatically. See also [SENSe:]POWer:ACHannel:GAPgap[:AUTO]:MSIZe. MANual In ‘Manual’ mode, up to four channels can be configured individually for each gap. Active gap channels are always evaluated, regardless of the gap size. See also [SENSe:]POWer:ACHannel:GCHannel[:STATe]:GAPgap:MANual:LOWer and [SENSe:]POWer:ACHannel:GCHannel[:STATe]:GAPgap:MANual:UPPer.

param gapChannel

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Gap’)