Resolution

SCPI Command :

[SENSe]:BWIDth[:RESolution]

class ResolutionCls

Resolution commands group definition. 4 total commands, 3 Subgroups, 1 group commands

get() → float

# SCPI: [SENSe]:BWIDth[:RESolution]
value: float = driver.applications.k14Xnr5G.sense.bandwidth.resolution.get()

Defines the resolution bandwidth and decouples the resolution bandwidth from the span. In the Real-Time application, the resolution bandwidth is always coupled to the span. For statistics measurements, this command defines the demodulation bandwidth. The 6 MHz Gaussian filter is provided for special measurements, such as 5G NR spurious emissions measurements. It is only available if you enter the value manually, not using the BAND:RES MAX command. It is not supported by all applications.

return

bandwidth: refer to specifications document Unit: Hz

set(bandwidth: float) → None

# SCPI: [SENSe]:BWIDth[:RESolution]
driver.applications.k14Xnr5G.sense.bandwidth.resolution.set(bandwidth = 1.0)

Defines the resolution bandwidth and decouples the resolution bandwidth from the span. In the Real-Time application, the resolution bandwidth is always coupled to the span. For statistics measurements, this command defines the demodulation bandwidth. The 6 MHz Gaussian filter is provided for special measurements, such as 5G NR spurious emissions measurements. It is only available if you enter the value manually, not using the BAND:RES MAX command. It is not supported by all applications.

param bandwidth

refer to specifications document Unit: Hz

Cloning the Group

# Create a clone of the original group, that exists independently
group2 = driver.applications.k14Xnr5G.sense.bandwidth.resolution.clone()

Subgroups

• Auto
• Ratio
• TypePy