Trace

SCPI Command :

[SENSe]:POWer:TRACe

Commands in total: 1
Subgroups: 0
Direct child commands: 1

get() → float[source]

# [SENSe]:POWer:TRACe
value: float = driver.applications.k10Xlte.sense.power.trace.get()

Selects the trace channel power measurements are performed on. For the measurement to work, the corresponding trace has to be active.

set(trace: float) → None[source]

# [SENSe]:POWer:TRACe
driver.applications.k10Xlte.sense.power.trace.set(trace = 1.0)

Selects the trace channel power measurements are performed on. For the measurement to work, the corresponding trace has to be active.