Count

SCPI Command :

[SENSe]:PMETer<p>:MTIMe:AVERage:COUNt

class CountCls

Count commands group definition. 1 total commands, 0 Subgroups, 1 group commands

get(powerMeter=PowerMeter.Default) → float

# SCPI: [SENSe]:PMETer<p>:MTIMe:AVERage:COUNt
value: float = driver.applications.k10Xlte.sense.pmeter.mtime.average.count.get(powerMeter = repcap.PowerMeter.Default)

Sets the number of power readings included in the averaging process of power sensor measurements. Extended averaging yields more stable results for power sensor measurements, especially for measurements on signals with a low power, because it minimizes the effects of noise.

param powerMeter

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Pmeter’)

return

number_readings: An average count of 0 or 1 performs one power reading. Range: 0 to 256

set(number_readings: float, powerMeter=PowerMeter.Default) → None

# SCPI: [SENSe]:PMETer<p>:MTIMe:AVERage:COUNt
driver.applications.k10Xlte.sense.pmeter.mtime.average.count.set(number_readings = 1.0, powerMeter = repcap.PowerMeter.Default)

Sets the number of power readings included in the averaging process of power sensor measurements. Extended averaging yields more stable results for power sensor measurements, especially for measurements on signals with a low power, because it minimizes the effects of noise.

param number_readings

An average count of 0 or 1 performs one power reading. Range: 0 to 256

param powerMeter

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Pmeter’)