State

SCPI Command :

TRACe:IQ[:STATe]
Commands in total: 1
Subgroups: 0
Direct child commands: 1
get() → bool[source]
# TRACe:IQ[:STATe]
value: bool = driver.applications.iqAnalyzer.trace.iq.state.get()

Activates the simple I/Q data acquisition mode (see ‘Different remote modes available’) . Executing this command also has the following effects: For triggered gated measurements,only the following gate trigger sources are supported:

  • The sweep, amplitude, input and trigger settings from the measurement are retained.

  • All measurements are turned off.

  • All traces are set to ‘Blank’ mode.

  • The I/Q data analysis mode is turned off (TRAC:IQ:EVAL OFF) .

Note: To turn trace display back on or to enable the evaluation functions of the I/Q Analyzer, execute the TRAC:IQ:EVAL ON command (see method RsFsw.trace.iq.eval.set() ) .

Returns:

state: ON | OFF | 0 | 1 OFF | 0 Switches the function off ON | 1 Switches the function on

set(state: bool) → None[source]
# TRACe:IQ[:STATe]
driver.applications.iqAnalyzer.trace.iq.state.set(state = False)

Activates the simple I/Q data acquisition mode (see ‘Different remote modes available’) . Executing this command also has the following effects: For triggered gated measurements,only the following gate trigger sources are supported:

  • The sweep, amplitude, input and trigger settings from the measurement are retained.

  • All measurements are turned off.

  • All traces are set to ‘Blank’ mode.

  • The I/Q data analysis mode is turned off (TRAC:IQ:EVAL OFF) .

Note: To turn trace display back on or to enable the evaluation functions of the I/Q Analyzer, execute the TRAC:IQ:EVAL ON command (see method RsFsw.trace.iq.eval.set() ) .

Parameters:

state – ON | OFF | 0 | 1 OFF | 0 Switches the function off ON | 1 Switches the function on