from .......Internal.Core import Core
from .......Internal.CommandsGroup import CommandsGroup
from .......Internal import Conversions
from ....... import enums
# noinspection PyPep8Naming,PyAttributeOutsideInit,SpellCheckingInspection
[docs]class OptimizationCls:
"""Optimization commands group definition. 5 total commands, 3 Subgroups, 1 group commands"""
def __init__(self, core: Core, parent):
self._core = core
self._cmd_group = CommandsGroup("optimization", core, parent)
@property
def bandwidth(self):
"""bandwidth commands group. 0 Sub-classes, 2 commands."""
if not hasattr(self, '_bandwidth'):
from .Bandwidth import BandwidthCls
self._bandwidth = BandwidthCls(self._core, self._cmd_group)
return self._bandwidth
@property
def hold(self):
"""hold commands group. 0 Sub-classes, 1 commands."""
if not hasattr(self, '_hold'):
from .Hold import HoldCls
self._hold = HoldCls(self._core, self._cmd_group)
return self._hold
@property
def local(self):
"""local commands group. 0 Sub-classes, 1 commands."""
if not hasattr(self, '_local'):
from .Local import LocalCls
self._local = LocalCls(self._core, self._cmd_group)
return self._local
# noinspection PyTypeChecker
[docs] def get_mode(self) -> enums.BbImpOptModeRangeFresponse:
"""SCPI: [SOURce<HW>]:CORRection:FRESponse:RF:OPTimization:MODE \n
Snippet: value: enums.BbImpOptModeRangeFresponse = driver.source.correction.fresponse.rf.optimization.get_mode() \n
Sets the optimization mode. The value selected here is used also as optimization mode in the I/Q modulator, and vice
versa. See 'Optimization Mode'. \n
:return: freq_resp_opt_mode: FAST| QHIGh | QHTable FAST Optimization by compensation for I/Q skew. QHTable Enabled if R&S SZU is connected to the R&S SMW and the connection is active. Improved optimization by maintained speed. QHIGh Optimization by compensation for I/Q skew and frequency response correction. This mode interrupts the RF signal. Do not use it in combination with the uninterrupted level settings and strictly monotone modes RF level modes. These RF level modes can be set with the following command: [:SOURcehw]:POWer:LBEHaviour *RST: QHIGh / QHTable (if R&S SZU connected to R&S SMW and the connection is active)
"""
response = self._core.io.query_str('SOURce<HwInstance>:CORRection:FRESponse:RF:OPTimization:MODE?')
return Conversions.str_to_scalar_enum(response, enums.BbImpOptModeRangeFresponse)
[docs] def set_mode(self, freq_resp_opt_mode: enums.BbImpOptModeRangeFresponse) -> None:
"""SCPI: [SOURce<HW>]:CORRection:FRESponse:RF:OPTimization:MODE \n
Snippet: driver.source.correction.fresponse.rf.optimization.set_mode(freq_resp_opt_mode = enums.BbImpOptModeRangeFresponse.FAST) \n
Sets the optimization mode. The value selected here is used also as optimization mode in the I/Q modulator, and vice
versa. See 'Optimization Mode'. \n
:param freq_resp_opt_mode: FAST| QHIGh | QHTable FAST Optimization by compensation for I/Q skew. QHTable Enabled if R&S SZU is connected to the R&S SMW and the connection is active. Improved optimization by maintained speed. QHIGh Optimization by compensation for I/Q skew and frequency response correction. This mode interrupts the RF signal. Do not use it in combination with the uninterrupted level settings and strictly monotone modes RF level modes. These RF level modes can be set with the following command: [:SOURcehw]:POWer:LBEHaviour *RST: QHIGh / QHTable (if R&S SZU connected to R&S SMW and the connection is active)
"""
param = Conversions.enum_scalar_to_str(freq_resp_opt_mode, enums.BbImpOptModeRangeFresponse)
self._core.io.write(f'SOURce<HwInstance>:CORRection:FRESponse:RF:OPTimization:MODE {param}')
def clone(self) -> 'OptimizationCls':
"""Clones the group by creating new object from it and its whole existing subgroups
Also copies all the existing default Repeated Capabilities setting,
which you can change independently without affecting the original group"""
new_group = OptimizationCls(self._core, self._cmd_group.parent)
self._cmd_group.synchronize_repcaps(new_group)
return new_group