from .....Internal.Core import Core
from .....Internal.CommandsGroup import CommandsGroup
from .....Internal import Conversions
# noinspection PyPep8Naming,PyAttributeOutsideInit,SpellCheckingInspection
[docs]
class PrampCls:
"""Pramp commands group definition. 48 total commands, 5 Subgroups, 2 group commands"""
def __init__(self, core: Core, parent):
self._core = core
self._cmd_group = CommandsGroup("pramp", core, parent)
@property
def clock(self):
"""clock commands group. 0 Sub-classes, 3 commands."""
if not hasattr(self, '_clock'):
from .Clock import ClockCls
self._clock = ClockCls(self._core, self._cmd_group)
return self._clock
@property
def ramp(self):
"""ramp commands group. 5 Sub-classes, 10 commands."""
if not hasattr(self, '_ramp'):
from .Ramp import RampCls
self._ramp = RampCls(self._core, self._cmd_group)
return self._ramp
@property
def setting(self):
"""setting commands group. 0 Sub-classes, 4 commands."""
if not hasattr(self, '_setting'):
from .Setting import SettingCls
self._setting = SettingCls(self._core, self._cmd_group)
return self._setting
@property
def trigger(self):
"""trigger commands group. 6 Sub-classes, 5 commands."""
if not hasattr(self, '_trigger'):
from .Trigger import TriggerCls
self._trigger = TriggerCls(self._core, self._cmd_group)
return self._trigger
@property
def waveform(self):
"""waveform commands group. 0 Sub-classes, 1 commands."""
if not hasattr(self, '_waveform'):
from .Waveform import WaveformCls
self._waveform = WaveformCls(self._core, self._cmd_group)
return self._waveform
[docs]
def preset(self) -> None:
"""SCPI: [SOURce<HW>]:BB:PRAMp:PRESet \n
Snippet: driver.source.bb.pramp.preset() \n
Sets the parameters of the power sweep to their default values (*RST values specified for the commands) . Not affected is
the state set with the command [:SOURce<hw>]:BB:PRAMp:STATe. \n
"""
self._core.io.write(f'SOURce<HwInstance>:BB:PRAMp:PRESet')
[docs]
def preset_with_opc(self, opc_timeout_ms: int = -1) -> None:
"""SCPI: [SOURce<HW>]:BB:PRAMp:PRESet \n
Snippet: driver.source.bb.pramp.preset_with_opc() \n
Sets the parameters of the power sweep to their default values (*RST values specified for the commands) . Not affected is
the state set with the command [:SOURce<hw>]:BB:PRAMp:STATe. \n
Same as preset, but waits for the operation to complete before continuing further. Use the RsSmw.utilities.opc_timeout_set() to set the timeout value. \n
:param opc_timeout_ms: Maximum time to wait in milliseconds, valid only for this call."""
self._core.io.write_with_opc(f'SOURce<HwInstance>:BB:PRAMp:PRESet', opc_timeout_ms)
[docs]
def get_state(self) -> bool:
"""SCPI: [SOURce<HW>]:BB:PRAMp:STATe \n
Snippet: value: bool = driver.source.bb.pramp.get_state() \n
Activates power sweep signal generation, and deactivates all digital standards, digital modulation modes and other sweeps
in the corresponding path. \n
:return: state: 1| ON| 0| OFF
"""
response = self._core.io.query_str('SOURce<HwInstance>:BB:PRAMp:STATe?')
return Conversions.str_to_bool(response)
[docs]
def set_state(self, state: bool) -> None:
"""SCPI: [SOURce<HW>]:BB:PRAMp:STATe \n
Snippet: driver.source.bb.pramp.set_state(state = False) \n
Activates power sweep signal generation, and deactivates all digital standards, digital modulation modes and other sweeps
in the corresponding path. \n
:param state: 1| ON| 0| OFF
"""
param = Conversions.bool_to_str(state)
self._core.io.write(f'SOURce<HwInstance>:BB:PRAMp:STATe {param}')
def clone(self) -> 'PrampCls':
"""Clones the group by creating new object from it and its whole existing subgroups
Also copies all the existing default Repeated Capabilities setting,
which you can change independently without affecting the original group"""
new_group = PrampCls(self._core, self._cmd_group.parent)
self._cmd_group.synchronize_repcaps(new_group)
return new_group