from ....Internal.Core import Core
from ....Internal.CommandsGroup import CommandsGroup
# noinspection PyPep8Naming,PyAttributeOutsideInit,SpellCheckingInspection
class UsbCls:
"""
| Commands in total: 1
| Subgroups: 0
| Direct child commands: 1
"""
def __init__(self, core: Core, parent):
self._core = core
self._cmd_group = CommandsGroup("usb", core, parent)
[docs]
def set(self) -> None:
"""
``SLISt:CLEar:USB`` \n
Snippet: ``driver.slist.clear.usb.set()`` \n
Removes all entries of R&S NRP power sensors connected over USB and using the VISA communication protocol from the sensor
mapping list. Does not affect entries for sensors communicating over the USB legacy protocol.
"""
self._core.io.write(f'SLISt:CLEar:USB')
[docs]
def set_with_opc(self, opc_timeout_ms: int = -1) -> None:
"""
``SLISt:CLEar:USB`` \n
Snippet: ``driver.slist.clear.usb.set_with_opc()`` \n
Removes all entries of R&S NRP power sensors connected over USB and using the VISA communication protocol from the sensor
mapping list. Does not affect entries for sensors communicating over the USB legacy protocol.
Same as set, but waits for the operation to complete before continuing further. Use the RsSmw.utilities.opc_timeout_set() to set the timeout value.
:param opc_timeout_ms: Maximum time to wait in milliseconds, valid only for this call.
"""
self._core.io.write_with_opc(f'SLISt:CLEar:USB', opc_timeout_ms)