from ....Internal.Core import Core
from ....Internal.CommandsGroup import CommandsGroup
from .... import repcap
# noinspection PyPep8Naming,PyAttributeOutsideInit,SpellCheckingInspection
class ZeroCls:
"""
| Commands in total: 1
| Subgroups: 0
| Direct child commands: 1
"""
def __init__(self, core: Core, parent):
self._core = core
self._cmd_group = CommandsGroup("zero", core, parent)
[docs]
def set(self, channel=repcap.Channel.Default) -> None:
"""
``SENSe<CH>:[POWer]:ZERO`` \n
Snippet: ``driver.sense.power.zero.set(channel = repcap.Channel.Default)`` \n
Performs zeroing of the sensor. Zeroing is required after warm-up, i.e. after connecting the sensor. Note: Switch off or
disconnect the RF power source from the sensor before zeroing.
We recommend that you zero in regular intervals (at least once a day) , if: \n
- The temperature has varied more than about 5 Deg.
- The sensor has been replaced.
- You want to measure very low power.
:param channel: optional repeated capability selector. Default value: Nr1 (settable in the interface 'Sense')
"""
channel_cmd_val = self._cmd_group.get_repcap_cmd_value(channel, repcap.Channel)
self._core.io.write(f'SENSe{channel_cmd_val}:POWer:ZERO')
[docs]
def set_with_opc(self, channel=repcap.Channel.Default, opc_timeout_ms: int = -1) -> None:
channel_cmd_val = self._cmd_group.get_repcap_cmd_value(channel, repcap.Channel)
"""
``SENSe<CH>:[POWer]:ZERO`` \n
Snippet: ``driver.sense.power.zero.set_with_opc(channel = repcap.Channel.Default)`` \n
Performs zeroing of the sensor. Zeroing is required after warm-up, i.e. after connecting the sensor. Note: Switch off or
disconnect the RF power source from the sensor before zeroing.
We recommend that you zero in regular intervals (at least once a day) , if: \n
- The temperature has varied more than about 5 Deg.
- The sensor has been replaced.
- You want to measure very low power.
Same as set, but waits for the operation to complete before continuing further. Use the RsSmw.utilities.opc_timeout_set() to set the timeout value.
:param channel: optional repeated capability selector. Default value: Nr1 (settable in the interface 'Sense')
:param opc_timeout_ms: Maximum time to wait in milliseconds, valid only for this call.
"""
self._core.io.write_with_opc(f'SENSe{channel_cmd_val}:POWer:ZERO', opc_timeout_ms)