Source

SCPI Command :

TRIGger<HW>:FPSWeep:SOURce

class SourceCls

Source commands group definition. 1 total commands, 0 Subgroups, 1 group commands

get(inputIx=InputIx.Default) → RsSmw.enums.SingExtAuto

# SCPI: TRIGger<HW>:FPSWeep:SOURce
value: enums.SingExtAuto = driver.trigger.fpSweep.source.get(inputIx = repcap.InputIx.Default)

Selects the trigger source for the combined RF frequency / level sweep. The parameter names correspond to the manual control. If needed, see table Table ‘Cross-reference between the manual and remote control’ for selecting the trigger source with SCPI compliant parameter names.

param inputIx

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Trigger’)

return

fp_trig_source: AUTO| IMMediate | SINGle| BUS| EXTernal | EAUTo AUTO|IMMediate Executes the combined RF sweep automatically. In this free-running mode, the trigger condition is met continuously. I.e. as soon as a sweep is completed, the next one starts immediately. SINGle|BUS Executes one complete sweep cycle triggered by the GPIB commands [:SOURcehw]:SWEep:COMBined:EXECute or *TRG. The mode has to be set to [:SOURcehw]:SWEep:COMBined:MODE AUTO. EXTernal An external signal triggers the sweep. EAUTo An external signal triggers the sweep. As soon as one sweep is finished, the next sweep starts. A second trigger event stops the sweep at the current frequency and level value pairs, a third trigger event starts the trigger at the start values, and so on.

set(fp_trig_source: RsSmw.enums.SingExtAuto, inputIx=InputIx.Default) → None

# SCPI: TRIGger<HW>:FPSWeep:SOURce
driver.trigger.fpSweep.source.set(fp_trig_source = enums.SingExtAuto.AUTO, inputIx = repcap.InputIx.Default)

Selects the trigger source for the combined RF frequency / level sweep. The parameter names correspond to the manual control. If needed, see table Table ‘Cross-reference between the manual and remote control’ for selecting the trigger source with SCPI compliant parameter names.

param fp_trig_source

AUTO| IMMediate | SINGle| BUS| EXTernal | EAUTo AUTO|IMMediate Executes the combined RF sweep automatically. In this free-running mode, the trigger condition is met continuously. I.e. as soon as a sweep is completed, the next one starts immediately. SINGle|BUS Executes one complete sweep cycle triggered by the GPIB commands [:SOURcehw]:SWEep:COMBined:EXECute or *TRG. The mode has to be set to [:SOURcehw]:SWEep:COMBined:MODE AUTO. EXTernal An external signal triggers the sweep. EAUTo An external signal triggers the sweep. As soon as one sweep is finished, the next sweep starts. A second trigger event stops the sweep at the current frequency and level value pairs, a third trigger event starts the trigger at the start values, and so on.

param inputIx

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Trigger’)