Measure

SCPI Command :

[SOURce<HW>]:POWer:SPC:MEASure
class MeasureCls[source]

Measure commands group definition. 1 total commands, 0 Subgroups, 1 group commands

set() None[source]
# SCPI: [SOURce<HW>]:POWer:SPC:MEASure
driver.source.power.spc.measure.set()

Sets the measured power value as reference level.

set_with_opc(opc_timeout_ms: int = - 1) None[source]
# SCPI: [SOURce<HW>]:POWer:SPC:MEASure
driver.source.power.spc.measure.set_with_opc()

Sets the measured power value as reference level.

Same as set, but waits for the operation to complete before continuing further. Use the RsSmw.utilities.opc_timeout_set() to set the timeout value.

param opc_timeout_ms

Maximum time to wait in milliseconds, valid only for this call.