Reference

SCPI Command :

[SOURce<HW>]:PHASe:REFerence

Commands in total: 1

Subgroups: 0

Direct child commands: 1

set() → None

# [SOURce<HW>]:PHASe:REFerence
driver.source.phase.reference.set()

Assigns the value set with command method RsSmw.source.phase.value() as the reference phase.

set_with_opc(opc_timeout_ms: int = -1) → None

# [SOURce<HW>]:PHASe:REFerence
driver.source.phase.reference.set_with_opc()

Assigns the value set with command method RsSmw.source.phase.value() as the reference phase.

Same as set, but waits for the operation to complete before continuing further. Use the RsSmw.utilities.opc_timeout_set() to set the timeout value.

Parameters:

opc_timeout_ms – Maximum time to wait in milliseconds, valid only for this call.