Reference#

SCPI Commands :

[SOURce<HW>]:FSIMulator:TCINterferer:REFerence:FRATio
[SOURce<HW>]:FSIMulator:TCINterferer:REFerence:LOSS
[SOURce<HW>]:FSIMulator:TCINterferer:REFerence:MMODe
[SOURce<HW>]:FSIMulator:TCINterferer:REFerence:PROFile
[SOURce<HW>]:FSIMulator:TCINterferer:REFerence:STATe
Commands in total: 9
Subgroups: 2
Direct child commands: 5
get_fratio ( ) → float
set_fratio ( fratio: float ) → None
# [SOURce<HW>]:FSIMulator:TCINterferer:REFerence:FRATio
# get:
value: float = driver.source.fsimulator.tcInterferer.reference.get_fratio()
# set:
driver.source.fsimulator.tcInterferer.reference.set_fratio(fratio = 1.0)

Sets the ratio of the actual Doppler frequency to the set Doppler frequency for the reference and moving path with 2 channel interferer fading.

Parameters:

fratio – float Range: -1 to 1

get_loss ( ) → float
set_loss ( loss: float ) → None
# [SOURce<HW>]:FSIMulator:TCINterferer:REFerence:LOSS
# get:
value: float = driver.source.fsimulator.tcInterferer.reference.get_loss()
# set:
driver.source.fsimulator.tcInterferer.reference.set_loss(loss = 1.0)

Seta the loss of the reference and moving path with 2 channel interferer fading.

Parameters:

loss – float Range: 0 to 50

get_mmode ( ) → Fad2CitfMode
set_mmode ( mmode: Fad2CitfMode ) → None
# [SOURce<HW>]:FSIMulator:TCINterferer:REFerence:MMODe
# get:
value: enums.Fad2CitfMode = driver.source.fsimulator.tcInterferer.reference.get_mmode()
# set:
driver.source.fsimulator.tcInterferer.reference.set_mmode(mmode = enums.Fad2CitfMode.HOPPing)

Selects the type of moving applied to the moving path.

Parameters:

mmode – SLIDing | HOPPing

get_profile ( ) → FadingProfileB
set_profile ( profile: FadingProfileB ) → None
# [SOURce<HW>]:FSIMulator:TCINterferer:REFerence:PROFile
# get:
value: enums.FadingProfileB = driver.source.fsimulator.tcInterferer.reference.get_profile()
# set:
driver.source.fsimulator.tcInterferer.reference.set_profile(profile = enums.FadingProfileB.BELLindoor)

Sets the fading profile to be used for the reference and moving path with 2 channel interferer fading.

Parameters:

profile – SPATh | PDOPpler | RAYLeigh

get_state ( ) → bool
set_state ( state: bool ) → None
# [SOURce<HW>]:FSIMulator:TCINterferer:REFerence:STATe
# get:
value: bool = driver.source.fsimulator.tcInterferer.reference.get_state()
# set:
driver.source.fsimulator.tcInterferer.reference.set_state(state = False)

Activate the reference and moving path of the 2 channel interferer fading configuration. The 2 channel interferer fading configuration and the fading simulator must be switched on separately, see method RsSmw.source.fsimulator.tcInterferer.state() and .method RsSmw.source.fsimulator.state()

Parameters:

state – 1 | ON | 0| OFF

Cloning the Group

# Create a copy of the original group, that exists independently
reference_copy = driver.source.fsimulator.tcInterferer.reference.clone()

Subgroups