Source

SCPI Command :

[SOURce<HW>]:FM<CH>:SOURce

Commands in total: 1
Subgroups: 0
Direct child commands: 1

get(generatorIx=GeneratorIx.Default) → FmSour[source]

# [SOURce<HW>]:FM<CH>:SOURce
value: enums.FmSour = driver.source.fm.source.get(generatorIx = repcap.GeneratorIx.Default)

Selects the modulation source for frequency modulation.

Parameters:: generatorIx – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Fm’)
Returns:: source: INTernal | EXTernal | LF1 | LF2 | NOISe | EXT1 | EXT2 | INTB LF1 | LF2 Uses an internally generated LF signal. INTernal = LF1 Works like LF1 EXTernal Works like EXT1 EXT1 | EXT2 Uses an externally supplied LF signal. NOISe Uses the internally generated noise signal. INTB Uses the internal baseband signal.

set(source: FmSour, generatorIx=GeneratorIx.Default) → None[source]

# [SOURce<HW>]:FM<CH>:SOURce
driver.source.fm.source.set(source = enums.FmSour.EXT1, generatorIx = repcap.GeneratorIx.Default)

Selects the modulation source for frequency modulation.

Parameters:

source – INTernal | EXTernal | LF1 | LF2 | NOISe | EXT1 | EXT2 | INTB LF1 | LF2 Uses an internally generated LF signal. INTernal = LF1 Works like LF1 EXTernal Works like EXT1 EXT1 | EXT2 Uses an externally supplied LF signal. NOISe Uses the internally generated noise signal. INTB Uses the internal baseband signal.
generatorIx – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Fm’)