Segment

SCPI Command :

[SOURce<HW>]:BB:WLNN:FBLock<CH>:SEGMent

Commands in total: 1
Subgroups: 0
Direct child commands: 1

get(frameBlock=FrameBlock.Default) → WlannFbSegment[source]

# [SOURce<HW>]:BB:WLNN:FBLock<CH>:SEGMent
value: enums.WlannFbSegment = driver.source.bb.wlnn.fblock.segment.get(frameBlock = repcap.FrameBlock.Default)

Selects one of the two segments in VHT-80+80 MHz mode with transmission bandwidth 80 MHz or 160 MHz. Both segments can only be generated with bandwidth 160 MHz. This parameter applies to VHT-80+80 MHz Tx mode only.

Parameters:: frameBlock – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Fblock’)
Returns:: segment: SEG0 | SEG1 | BOTH

set(segment: WlannFbSegment, frameBlock=FrameBlock.Default) → None[source]

# [SOURce<HW>]:BB:WLNN:FBLock<CH>:SEGMent
driver.source.bb.wlnn.fblock.segment.set(segment = enums.WlannFbSegment.BOTH, frameBlock = repcap.FrameBlock.Default)

Selects one of the two segments in VHT-80+80 MHz mode with transmission bandwidth 80 MHz or 160 MHz. Both segments can only be generated with bandwidth 160 MHz. This parameter applies to VHT-80+80 MHz Tx mode only.

Parameters:

segment – SEG0 | SEG1 | BOTH
frameBlock – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Fblock’)