Brs

SCPI Commands :

[SOURce<HW>]:BB:V5G:DL:SIGNals:BRS:BTRPeriod
[SOURce<HW>]:BB:V5G:DL:SIGNals:BRS:NAP

Commands in total: 2
Subgroups: 0
Direct child commands: 2

get_btr_period() → BrsTransPeriod[source]

# [SOURce<HW>]:BB:V5G:DL:SIGNals:BRS:BTRPeriod
value: enums.BrsTransPeriod = driver.source.bb.v5G.downlink.signals.brs.get_btr_period()

Specifies the beam reference signal transmission period signaled via .

Returns:: trans_period: P00 | P01 | P10 | P11 P00: single-slot ( 5 ms) , maximum 7 downlink transmitting beams per antenna port P01: single-subframe (= 5 ms) , maximum 14 downlink transmitting beams per antenna port P10: two-subframe (= 10 ms) , maximum 28 downlink transmitting beams per antenna port P11: four-subframe (= 20 ms) , maximum 56 downlink transmitting beams per antenna port

get_nap() → CsiRsNumAp[source]

# [SOURce<HW>]:BB:V5G:DL:SIGNals:BRS:NAP
value: enums.CsiRsNumAp = driver.source.bb.v5G.downlink.signals.brs.get_nap()

Specifies the number of antenna ports (one, two, four or eight) the BRSs are transmitted on.

set_btr_period(trans_period: BrsTransPeriod) → None[source]

# [SOURce<HW>]:BB:V5G:DL:SIGNals:BRS:BTRPeriod
driver.source.bb.v5G.downlink.signals.brs.set_btr_period(trans_period = enums.BrsTransPeriod.P00)

Specifies the beam reference signal transmission period signaled via .

Parameters:: trans_period – P00 | P01 | P10 | P11 P00: single-slot ( 5 ms) , maximum 7 downlink transmitting beams per antenna port P01: single-subframe (= 5 ms) , maximum 14 downlink transmitting beams per antenna port P10: two-subframe (= 10 ms) , maximum 28 downlink transmitting beams per antenna port P11: four-subframe (= 20 ms) , maximum 56 downlink transmitting beams per antenna port

set_nap(brs_num_ap: CsiRsNumAp) → None[source]

# [SOURce<HW>]:BB:V5G:DL:SIGNals:BRS:NAP
driver.source.bb.v5G.downlink.signals.brs.set_nap(brs_num_ap = enums.CsiRsNumAp.AP1)

Specifies the number of antenna ports (one, two, four or eight) the BRSs are transmitted on.