Sync

SCPI Commands :

[SOURce<HW>]:BB:ONEWeb:DL:SYNC:PPOWer
[SOURce<HW>]:BB:ONEWeb:DL:SYNC:PSTate
[SOURce<HW>]:BB:ONEWeb:DL:SYNC:TXANtenna

Commands in total: 3

Subgroups: 0

Direct child commands: 3

get_ppower() → float

# [SOURce<HW>]:BB:ONEWeb:DL:SYNC:PPOWer
value: float = driver.source.bb.oneweb.downlink.sync.get_ppower()

Sets the power of the primary synchronization signal (P-SYNC) .

Returns:

ppower: float Range: -80 to 10

get_pstate() → bool

# [SOURce<HW>]:BB:ONEWeb:DL:SYNC:PSTate
value: bool = driver.source.bb.oneweb.downlink.sync.get_pstate()

Sets the P-SYNC signal transmission state.

Returns:

psync_state: 1 | ON | 0| OFF

get_tx_antenna() → TxAntennaGnss

# [SOURce<HW>]:BB:ONEWeb:DL:SYNC:TXANtenna
value: enums.TxAntennaGnss = driver.source.bb.oneweb.downlink.sync.get_tx_antenna()

No help available

set_ppower(ppower: float) → None

# [SOURce<HW>]:BB:ONEWeb:DL:SYNC:PPOWer
driver.source.bb.oneweb.downlink.sync.set_ppower(ppower = 1.0)

Sets the power of the primary synchronization signal (P-SYNC) .

Parameters:

ppower – float Range: -80 to 10

set_pstate(psync_state: bool) → None

# [SOURce<HW>]:BB:ONEWeb:DL:SYNC:PSTate
driver.source.bb.oneweb.downlink.sync.set_pstate(psync_state = False)

Sets the P-SYNC signal transmission state.

Parameters:

psync_state – 1 | ON | 0| OFF

set_tx_antenna(tx_antenna: TxAntennaGnss) → None

# [SOURce<HW>]:BB:ONEWeb:DL:SYNC:TXANtenna
driver.source.bb.oneweb.downlink.sync.set_tx_antenna(tx_antenna = enums.TxAntennaGnss.ALL)

No help available