Pbch
SCPI Commands :
[SOURce<HW>]:BB:ONEWeb:DL:PBCH:MIB
[SOURce<HW>]:BB:ONEWeb:DL:PBCH:MSPare
[SOURce<HW>]:BB:ONEWeb:DL:PBCH:RATBa
[SOURce<HW>]:BB:ONEWeb:DL:PBCH:SOFFset
[SOURce<HW>]:BB:ONEWeb:DL:PBCH:SRPeriod
- class PbchCls[source]
Pbch commands group definition. 5 total commands, 0 Subgroups, 5 group commands
- get_mib() bool [source]
# SCPI: [SOURce<HW>]:BB:ONEWeb:DL:PBCH:MIB value: bool = driver.source.bb.oneweb.downlink.pbch.get_mib()
Enables transmission of real MIB data.
- return
state: 1| ON| 0| OFF
- get_mspare() str [source]
# SCPI: [SOURce<HW>]:BB:ONEWeb:DL:PBCH:MSPare value: str = driver.source.bb.oneweb.downlink.pbch.get_mspare()
Sets the 10 spare bits in the PBCH transmission.
- return
mib_spare_bits: 64 bit
- get_ratba() float [source]
# SCPI: [SOURce<HW>]:BB:ONEWeb:DL:PBCH:RATBa value: float = driver.source.bb.oneweb.downlink.pbch.get_ratba()
No command help available
- return
ratio_pb_pa: No help available
- get_soffset() int [source]
# SCPI: [SOURce<HW>]:BB:ONEWeb:DL:PBCH:SOFFset value: int = driver.source.bb.oneweb.downlink.pbch.get_soffset()
Sets an offset for the start value of the SFN (System Frame Number) .
- return
sfn_offset: integer Range: 0 to 1020
- get_sr_period() RsSmw.enums.PbchSfnRestPeriod [source]
# SCPI: [SOURce<HW>]:BB:ONEWeb:DL:PBCH:SRPeriod value: enums.PbchSfnRestPeriod = driver.source.bb.oneweb.downlink.pbch.get_sr_period()
No command help available
- return
sfn_rest_period: No help available
- set_mib(state: bool) None [source]
# SCPI: [SOURce<HW>]:BB:ONEWeb:DL:PBCH:MIB driver.source.bb.oneweb.downlink.pbch.set_mib(state = False)
Enables transmission of real MIB data.
- param state
1| ON| 0| OFF
- set_mspare(mib_spare_bits: str) None [source]
# SCPI: [SOURce<HW>]:BB:ONEWeb:DL:PBCH:MSPare driver.source.bb.oneweb.downlink.pbch.set_mspare(mib_spare_bits = rawAbc)
Sets the 10 spare bits in the PBCH transmission.
- param mib_spare_bits
64 bit
- set_ratba(ratio_pb_pa: float) None [source]
# SCPI: [SOURce<HW>]:BB:ONEWeb:DL:PBCH:RATBa driver.source.bb.oneweb.downlink.pbch.set_ratba(ratio_pb_pa = 1.0)
No command help available
- param ratio_pb_pa
No help available
- set_soffset(sfn_offset: int) None [source]
# SCPI: [SOURce<HW>]:BB:ONEWeb:DL:PBCH:SOFFset driver.source.bb.oneweb.downlink.pbch.set_soffset(sfn_offset = 1)
Sets an offset for the start value of the SFN (System Frame Number) .
- param sfn_offset
integer Range: 0 to 1020
- set_sr_period(sfn_rest_period: RsSmw.enums.PbchSfnRestPeriod) None [source]
# SCPI: [SOURce<HW>]:BB:ONEWeb:DL:PBCH:SRPeriod driver.source.bb.oneweb.downlink.pbch.set_sr_period(sfn_rest_period = enums.PbchSfnRestPeriod.PER3gpp)
No command help available
- param sfn_rest_period
No help available