Noffsets

SCPI Command :

[SOURce<HW>]:BB:NR5G:UBWP:USER<US(CH0)>:CELL<CC(ST0)>:UL:BWP<BWP(DIR0)>:PUSCh:FHOFfsets:NOFFsets
Commands in total: 1
Subgroups: 0
Direct child commands: 1
get(userNull=UserNull.Default, cellNull=CellNull.Default, bwPartNull=BwPartNull.Default) → int[source]
# [SOURce<HW>]:BB:NR5G:UBWP:USER<US(CH0)>:CELL<CC(ST0)>:UL:BWP<BWP(DIR0)>:PUSCh:FHOFfsets:NOFFsets
value: int = driver.source.bb.nr5G.ubwp.user.cell.uplink.bwp.pusch.fhOffsets.noffsets.get(userNull = repcap.UserNull.Default, cellNull = repcap.CellNull.Default, bwPartNull = repcap.BwPartNull.Default)

Defines the number off frequency hopping offsets. Prerequisites for this command

  • If the size of the active BWP is fewer than 50 PRBs, one of two higher layer configured offsets are indicated in the UL grant.

  • If the size of the active BWP is equal to or greater than 50 PRBs, one of four higher layer configured offsets are indicated in the UL grant.

Parameters:

  • userNull – optional repeated capability selector. Default value: Nr0 (settable in the interface ‘User’)

  • cellNull – optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Cell’)

  • bwPartNull – optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Bwp’)

Returns:

num_freq_hop_off: integer Range: 2 to 4