Mlength

SCPI Command :

[SOURce<HW>]:BB:NR5G:UBWP:USER<US(CH0)>:CELL<CC(ST0)>:DL:BWP<BWP(DIR0)>:PDSCh:DMTA:MLENgth

class MlengthCls[source]

Mlength commands group definition. 1 total commands, 0 Subgroups, 1 group commands

get(userNull=UserNull.Default, cellNull=CellNull.Default, bwPartNull=BwPartNull.Default) → int[source]

# SCPI: [SOURce<HW>]:BB:NR5G:UBWP:USER<US(CH0)>:CELL<CC(ST0)>:DL:BWP<BWP(DIR0)>:PDSCh:DMTA:MLENgth
value: int = driver.source.bb.nr5G.ubwp.user.cell.downlink.bwp.pdsch.dmta.mlength.get(userNull = repcap.UserNull.Default, cellNull = repcap.CellNull.Default, bwPartNull = repcap.BwPartNull.Default)

Sets if single- or double-symbol DMRS is used.

param userNull

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘User’)

param cellNull

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Cell’)

param bwPartNull

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Bwp’)

return

dmrs_max_length: integer Range: 1 to 2

set(dmrs_max_length: int, userNull=UserNull.Default, cellNull=CellNull.Default, bwPartNull=BwPartNull.Default) → None[source]

# SCPI: [SOURce<HW>]:BB:NR5G:UBWP:USER<US(CH0)>:CELL<CC(ST0)>:DL:BWP<BWP(DIR0)>:PDSCh:DMTA:MLENgth
driver.source.bb.nr5G.ubwp.user.cell.downlink.bwp.pdsch.dmta.mlength.set(dmrs_max_length = 1, userNull = repcap.UserNull.Default, cellNull = repcap.CellNull.Default, bwPartNull = repcap.BwPartNull.Default)

Sets if single- or double-symbol DMRS is used.

param dmrs_max_length

integer Range: 1 to 2

param userNull

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘User’)

param cellNull

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Cell’)

param bwPartNull

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Bwp’)