Is2

SCPI Commands :

[SOURce<HW>]:BB:NR5G:TCW:IS2:IFTYpe
[SOURce<HW>]:BB:NR5G:TCW:IS2:PLEVel
[SOURce<HW>]:BB:NR5G:TCW:IS2:RFFRequency
Commands in total: 3
Subgroups: 0
Direct child commands: 3
get_if_type() → InterfererTypeCw[source]
# [SOURce<HW>]:BB:NR5G:TCW:IS2:IFTYpe
value: enums.InterfererTypeCw = driver.source.bb.nr5G.tcw.is2.get_if_type()

Selects the type of the interfering signal. The second interfering signal is always a CW signal.

Returns:

interferer_type_2: CW

get_plevel() → float[source]
# [SOURce<HW>]:BB:NR5G:TCW:IS2:PLEVel
value: float = driver.source.bb.nr5G.tcw.is2.get_plevel()

Queries the power level of the interfering signal.

Returns:

is_2_powel_level: float Range: -145 to 20, Unit: dBm

get_rf_frequency() → int[source]
# [SOURce<HW>]:BB:NR5G:TCW:IS2:RFFRequency
value: int = driver.source.bb.nr5G.tcw.is2.get_rf_frequency()

Queries the center frequency of the interfering signal 1 and 2.