SeqHopping

SCPI Command :

[SOURce<HW>]:BB:NR5G:SCHed:CELL<CC(CH0)>:SUBF<SF(ST0)>:USER<US(DIR0)>:BWPart<BWP(GR0)>:ALLoc<AL(USER0)>:PUSCh:DMRS:SEQHopping
class SeqHoppingCls[source]

SeqHopping commands group definition. 1 total commands, 0 Subgroups, 1 group commands

get(cellNull=CellNull.Default, subframeNull=SubframeNull.Default, userNull=UserNull.Default, bwPartNull=BwPartNull.Default, allocationNull=AllocationNull.Default) PuschGrpSeqAll[source]
# SCPI: [SOURce<HW>]:BB:NR5G:SCHed:CELL<CC(CH0)>:SUBF<SF(ST0)>:USER<US(DIR0)>:BWPart<BWP(GR0)>:ALLoc<AL(USER0)>:PUSCh:DMRS:SEQHopping
value: enums.PuschGrpSeqAll = driver.source.bb.nr5G.scheduling.cell.subf.user.bwPart.alloc.pusch.dmrs.seqHopping.get(cellNull = repcap.CellNull.Default, subframeNull = repcap.SubframeNull.Default, userNull = repcap.UserNull.Default, bwPartNull = repcap.BwPartNull.Default, allocationNull = repcap.AllocationNull.Default)

Sets the higher-layer parameter groupOrSequenceHopping that defines the sequence group, required for the DMRS sequence generation according to .

param cellNull:

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Cell’)

param subframeNull:

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Subf’)

param userNull:

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘User’)

param bwPartNull:

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘BwPart’)

param allocationNull:

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Alloc’)

return:

dmrs_grp_seq_hopp: NEITher| GRP| SEQuence NEITher Disables the group and sequence hopping for the DMRS sequence generation. GRP Enables the group hopping for the DMRS sequence generation. SEQuence Enables the sequence hopping for the DMRS sequence generation.

set(dmrs_grp_seq_hopp: PuschGrpSeqAll, cellNull=CellNull.Default, subframeNull=SubframeNull.Default, userNull=UserNull.Default, bwPartNull=BwPartNull.Default, allocationNull=AllocationNull.Default) None[source]
# SCPI: [SOURce<HW>]:BB:NR5G:SCHed:CELL<CC(CH0)>:SUBF<SF(ST0)>:USER<US(DIR0)>:BWPart<BWP(GR0)>:ALLoc<AL(USER0)>:PUSCh:DMRS:SEQHopping
driver.source.bb.nr5G.scheduling.cell.subf.user.bwPart.alloc.pusch.dmrs.seqHopping.set(dmrs_grp_seq_hopp = enums.PuschGrpSeqAll.GRP, cellNull = repcap.CellNull.Default, subframeNull = repcap.SubframeNull.Default, userNull = repcap.UserNull.Default, bwPartNull = repcap.BwPartNull.Default, allocationNull = repcap.AllocationNull.Default)

Sets the higher-layer parameter groupOrSequenceHopping that defines the sequence group, required for the DMRS sequence generation according to .

param dmrs_grp_seq_hopp:

NEITher| GRP| SEQuence NEITher Disables the group and sequence hopping for the DMRS sequence generation. GRP Enables the group hopping for the DMRS sequence generation. SEQuence Enables the sequence hopping for the DMRS sequence generation.

param cellNull:

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Cell’)

param subframeNull:

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Subf’)

param userNull:

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘User’)

param bwPartNull:

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘BwPart’)

param allocationNull:

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Alloc’)