Precg

SCPI Command :

[SOURce<HW>]:BB:NR5G:SCHed:CELL<CC(CH0)>:SUBF<SF(ST0)>:USER<US(DIR0)>:BWPart<BWP(GR0)>:ALLoc<AL(USER0)>:PDSCh:PRECg
Commands in total: 1
Subgroups: 0
Direct child commands: 1
get(cellNull=CellNull.Default, subframeNull=SubframeNull.Default, userNull=UserNull.Default, bwPartNull=BwPartNull.Default, allocationNull=AllocationNull.Default) → DlpRbBundlingGranularity[source]
# [SOURce<HW>]:BB:NR5G:SCHed:CELL<CC(CH0)>:SUBF<SF(ST0)>:USER<US(DIR0)>:BWPart<BWP(GR0)>:ALLoc<AL(USER0)>:PDSCh:PRECg
value: enums.DlpRbBundlingGranularity = driver.source.bb.nr5G.scheduling.cell.subf.user.bwPart.alloc.pdsch.precg.get(cellNull = repcap.CellNull.Default, subframeNull = repcap.SubframeNull.Default, userNull = repcap.UserNull.Default, bwPartNull = repcap.BwPartNull.Default, allocationNull = repcap.AllocationNull.Default)

For PDSCH allocations, the precoding granularity can be adjusted. Precondition is that the precoding for the PDSCH is enabled under ‘User/BWP Settings > DL BWP Config > PDSCH > General Settings > Static Bundle Size’.

Parameters:

  • cellNull – optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Cell’)

  • subframeNull – optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Subf’)

  • userNull – optional repeated capability selector. Default value: Nr0 (settable in the interface ‘User’)

  • bwPartNull – optional repeated capability selector. Default value: Nr0 (settable in the interface ‘BwPart’)

  • allocationNull – optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Alloc’)

Returns:

user_alloc_pdschp: N2 | N4 | WIDeband N2 Precoding granularity is set to N2. N4 Precoding granularity is set to N4. This setting is not available if: - method RsSmw.source.bb.nr5G.ubwp.user.cell.downlink.bwp.pdsch.vpInter.get() equals 2 or - method RsSmw.source.bb.nr5G.ubwp.user.cell.downlink.bwp.pdsch.rbgSize.get() equals Config1 and BWP size <= 36 RBs WIDeband Precoding granularity is set to wideband.