ApSelect<AntennaPortNull>

SCPI Command :

[SOURce<HW>]:BB:NR5G:SCHed:CELL<CC(CH0)>:SUBF<SF(ST0)>:USER<US(DIR0)>:BWPart<BWP(GR0)>:ALLoc<AL(USER0)>:PDSCh:[DMRS]:APSelect<S2US0>
Commands in total: 1
Subgroups: 0
Direct child commands: 1

Repeated Capability Setting:

# Range: Nr0 .. Nr2001

driver.source.bb.nr5G.scheduling.cell.subf.user.bwPart.alloc.pdsch.dmrs.apSelect.repcap_antennaPortNull_set(repcap.AntennaPortNull.Nr0)
get(cellNull=CellNull.Default, subframeNull=SubframeNull.Default, userNull=UserNull.Default, bwPartNull=BwPartNull.Default, allocationNull=AllocationNull.Default, antennaPortNull=AntennaPortNull.Default) → Nr5GpdschAp[source]
# [SOURce<HW>]:BB:NR5G:SCHed:CELL<CC(CH0)>:SUBF<SF(ST0)>:USER<US(DIR0)>:BWPart<BWP(GR0)>:ALLoc<AL(USER0)>:PDSCh:[DMRS]:APSelect<S2US0>
value: enums.Nr5GpdschAp = driver.source.bb.nr5G.scheduling.cell.subf.user.bwPart.alloc.pdsch.dmrs.apSelect.get(cellNull = repcap.CellNull.Default, subframeNull = repcap.SubframeNull.Default, userNull = repcap.UserNull.Default, bwPartNull = repcap.BwPartNull.Default, allocationNull = repcap.AllocationNull.Default, antennaPortNull = repcap.AntennaPortNull.Default)

Each layer of a PDSCH allocation is mapped to a certain antenna port. By the command the antenna ports are selected which are used for the transmission of the PDSCH allocation.

Parameters:

  • cellNull – optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Cell’)

  • subframeNull – optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Subf’)

  • userNull – optional repeated capability selector. Default value: Nr0 (settable in the interface ‘User’)

  • bwPartNull – optional repeated capability selector. Default value: Nr0 (settable in the interface ‘BwPart’)

  • allocationNull – optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Alloc’)

  • antennaPortNull – optional repeated capability selector. Default value: Nr0 (settable in the interface ‘ApSelect’)

Returns:

pdsch_ap_sel: AP1000 | AP1001 | AP1002 | AP1003 | AP1004 | AP1005 | AP1006 | AP1007 | AP1008 | AP1009 | AP1010 | AP1011

Cloning the Group

# Create a copy of the original group, that exists independently
apSelect_copy = driver.source.bb.nr5G.scheduling.cell.subf.user.bwPart.alloc.pdsch.dmrs.apSelect.clone()