Puncturing

SCPI Command :

[SOURce<HW>]:BB:NR5G:SCHed:CELL<CC(CH0)>:SUBF<SF(ST0)>:USER<US(DIR0)>:BWPart<BWP(GR0)>:ALLoc<AL(USER0)>:CS:PUNCturing
class PuncturingCls[source]

Puncturing commands group definition. 1 total commands, 0 Subgroups, 1 group commands

get(cellNull=CellNull.Default, subframeNull=SubframeNull.Default, userNull=UserNull.Default, bwPartNull=BwPartNull.Default, allocationNull=AllocationNull.Default) → bool[source]
# SCPI: [SOURce<HW>]:BB:NR5G:SCHed:CELL<CC(CH0)>:SUBF<SF(ST0)>:USER<US(DIR0)>:BWPart<BWP(GR0)>:ALLoc<AL(USER0)>:CS:PUNCturing
value: bool = driver.source.bb.nr5G.scheduling.cell.subf.user.bwPart.alloc.cs.puncturing.get(cellNull = repcap.CellNull.Default, subframeNull = repcap.SubframeNull.Default, userNull = repcap.UserNull.Default, bwPartNull = repcap.BwPartNull.Default, allocationNull = repcap.AllocationNull.Default)
Turns puncturing of the CORESET on and off.

INTRO_CMD_HELP: Prerequisites for this command

  • Select a 5 MHz channel bandwidth ([:SOURce<hw>]:BB:NR5G:NODE:CELL<cc>:CBW) .

  • Select a 15 kHz subcarrier spacing ([:SOURce<hw>]:BB:NR5G:NODE:CELL<cc>:TXBW:S15K:USE) .

param cellNull:

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Cell’)

param subframeNull:

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Subf’)

param userNull:

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘User’)

param bwPartNull:

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘BwPart’)

param allocationNull:

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Alloc’)

return:

puncturing: OFF| ON| 1| 0

set(puncturing: bool, cellNull=CellNull.Default, subframeNull=SubframeNull.Default, userNull=UserNull.Default, bwPartNull=BwPartNull.Default, allocationNull=AllocationNull.Default) → None[source]
# SCPI: [SOURce<HW>]:BB:NR5G:SCHed:CELL<CC(CH0)>:SUBF<SF(ST0)>:USER<US(DIR0)>:BWPart<BWP(GR0)>:ALLoc<AL(USER0)>:CS:PUNCturing
driver.source.bb.nr5G.scheduling.cell.subf.user.bwPart.alloc.cs.puncturing.set(puncturing = False, cellNull = repcap.CellNull.Default, subframeNull = repcap.SubframeNull.Default, userNull = repcap.UserNull.Default, bwPartNull = repcap.BwPartNull.Default, allocationNull = repcap.AllocationNull.Default)
Turns puncturing of the CORESET on and off.

INTRO_CMD_HELP: Prerequisites for this command

  • Select a 5 MHz channel bandwidth ([:SOURce<hw>]:BB:NR5G:NODE:CELL<cc>:CBW) .

  • Select a 15 kHz subcarrier spacing ([:SOURce<hw>]:BB:NR5G:NODE:CELL<cc>:TXBW:S15K:USE) .

param puncturing:

OFF| ON| 1| 0

param cellNull:

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Cell’)

param subframeNull:

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Subf’)

param userNull:

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘User’)

param bwPartNull:

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘BwPart’)

param allocationNull:

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Alloc’)