Nap

SCPI Command :

[SOURce<HW>]:BB:NR5G:NODE:CELL<CC(CH0)>:LTE:PATT<ST0>:NAP
class NapCls[source]

Nap commands group definition. 1 total commands, 0 Subgroups, 1 group commands

get(cellNull=CellNull.Default, patternNull=PatternNull.Default) → RsSmw.enums.NumberOfPorts[source]
# SCPI: [SOURce<HW>]:BB:NR5G:NODE:CELL<CC(CH0)>:LTE:PATT<ST0>:NAP
value: enums.NumberOfPorts = driver.source.bb.nr5G.node.cell.lte.patt.nap.get(cellNull = repcap.CellNull.Default, patternNull = repcap.PatternNull.Default)
Selects the number of antenna ports for an LTE signal.

INTRO_CMD_HELP: Prerequisites for this command

  • Turn on LTE-CRS coexistence ([:SOURce<hw>]:BB:NR5G:NODE:CELL<cc>:LTE:STATe) .

param cellNull

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Cell’)

param patternNull

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Patt’)

return

lte_antenna_ports: No help available

set(lte_antenna_ports: RsSmw.enums.NumberOfPorts, cellNull=CellNull.Default, patternNull=PatternNull.Default) → None[source]
# SCPI: [SOURce<HW>]:BB:NR5G:NODE:CELL<CC(CH0)>:LTE:PATT<ST0>:NAP
driver.source.bb.nr5G.node.cell.lte.patt.nap.set(lte_antenna_ports = enums.NumberOfPorts.AP1, cellNull = repcap.CellNull.Default, patternNull = repcap.PatternNull.Default)
Selects the number of antenna ports for an LTE signal.

INTRO_CMD_HELP: Prerequisites for this command

  • Turn on LTE-CRS coexistence ([:SOURce<hw>]:BB:NR5G:NODE:CELL<cc>:LTE:STATe) .

param lte_antenna_ports

AP1| AP2| AP4

param cellNull

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Cell’)

param patternNull

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Patt’)