Trigger

SCPI Commands :

[SOURce<HW>]:BB:NFC:TRIGger:RMODe
[SOURce<HW>]:BB:NFC:TRIGger:SLENgth
[SOURce<HW>]:BB:NFC:TRIGger:SLUNit
[SOURce<HW>]:BB:NFC:TRIGger:SOURce
[SOURce<HW>]:BB:NFC:[TRIGger]:SEQuence

class TriggerCls

Trigger commands group definition. 22 total commands, 6 Subgroups, 5 group commands

get_rmode() → RsSmw.enums.TrigRunMode

# SCPI: [SOURce<HW>]:BB:NFC:TRIGger:RMODe
value: enums.TrigRunMode = driver.source.bb.nfc.trigger.get_rmode()

Queries the status of signal generation.

return

rmode: STOP| RUN

get_sequence() → RsSmw.enums.DmTrigMode

# SCPI: [SOURce<HW>]:BB:NFC:[TRIGger]:SEQuence
value: enums.DmTrigMode = driver.source.bb.nfc.trigger.get_sequence()

Selects a reqular trigger mode.

return

sequence: AUTO| RETRigger| AAUTo| ARETrigger| SINGle

get_sl_unit() → RsSmw.enums.UnitSlB

# SCPI: [SOURce<HW>]:BB:NFC:TRIGger:SLUNit
value: enums.UnitSlB = driver.source.bb.nfc.trigger.get_sl_unit()

Defines the unit for the entry of the signal sequence length.

return

sl_unit: SEQuence| SAMPle

get_slength() → int

# SCPI: [SOURce<HW>]:BB:NFC:TRIGger:SLENgth
value: int = driver.source.bb.nfc.trigger.get_slength()

Defines the length of the signal sequence to be output in the SINGle trigger mode.

return

slength: integer Range: 1 to 4294967295.0

get_source() → RsSmw.enums.TriggerSourceC

# SCPI: [SOURce<HW>]:BB:NFC:TRIGger:SOURce
value: enums.TriggerSourceC = driver.source.bb.nfc.trigger.get_source()


    INTRO_CMD_HELP: Selects the trigger signal source and determines the way the triggering is executed. Provided are:

    - Internal triggering by a command (INTernal)
    - External trigger signal via one of the local or global connectors
    Table Header:

    - EGT1|EGT2: External global trigger
    - EGC1|EGC2: External global clock
    - ELTRigger: External local trigger
    - ELCLock: External local clock
    - Internal triggering by a signal from the other basebands (INTA|INTB)
    - OBASeband|BEXTernal|EXTernal: Setting only Provided only for backward

compatibility with other Rohde & Schwarz signal generators. The R&S SMW accepts these values and maps them automatically as follows: EXTernal = EGT1, BEXTernal = EGT2, OBASeband = INTA or INTB (depending on the current baseband)

return

source: INTB| INTernal| OBASeband| EGT1| EGT2| EGC1| EGC2| ELTRigger| INTA| ELCLock| BEXTernal| EXTernal

set_sequence(sequence: RsSmw.enums.DmTrigMode) → None

# SCPI: [SOURce<HW>]:BB:NFC:[TRIGger]:SEQuence
driver.source.bb.nfc.trigger.set_sequence(sequence = enums.DmTrigMode.AAUTo)

Selects a reqular trigger mode.

param sequence

AUTO| RETRigger| AAUTo| ARETrigger| SINGle

set_sl_unit(sl_unit: RsSmw.enums.UnitSlB) → None

# SCPI: [SOURce<HW>]:BB:NFC:TRIGger:SLUNit
driver.source.bb.nfc.trigger.set_sl_unit(sl_unit = enums.UnitSlB.SAMPle)

Defines the unit for the entry of the signal sequence length.

param sl_unit

SEQuence| SAMPle

set_slength(slength: int) → None

# SCPI: [SOURce<HW>]:BB:NFC:TRIGger:SLENgth
driver.source.bb.nfc.trigger.set_slength(slength = 1)

Defines the length of the signal sequence to be output in the SINGle trigger mode.

param slength

integer Range: 1 to 4294967295.0

set_source(source: RsSmw.enums.TriggerSourceC) → None

# SCPI: [SOURce<HW>]:BB:NFC:TRIGger:SOURce
driver.source.bb.nfc.trigger.set_source(source = enums.TriggerSourceC.BBSY)


    INTRO_CMD_HELP: Selects the trigger signal source and determines the way the triggering is executed. Provided are:

    - Internal triggering by a command (INTernal)
    - External trigger signal via one of the local or global connectors
    Table Header:

    - EGT1|EGT2: External global trigger
    - EGC1|EGC2: External global clock
    - ELTRigger: External local trigger
    - ELCLock: External local clock
    - Internal triggering by a signal from the other basebands (INTA|INTB)
    - OBASeband|BEXTernal|EXTernal: Setting only Provided only for backward

compatibility with other Rohde & Schwarz signal generators. The R&S SMW accepts these values and maps them automatically as follows: EXTernal = EGT1, BEXTernal = EGT2, OBASeband = INTA or INTB (depending on the current baseband)

param source

INTB| INTernal| OBASeband| EGT1| EGT2| EGC1| EGC2| ELTRigger| INTA| ELCLock| BEXTernal| EXTernal

Cloning the Group

# Create a clone of the original group, that exists independently
group2 = driver.source.bb.nfc.trigger.clone()

Subgroups

• Arm
  • Execute
• Execute
• External
  • Synchronize
• Obaseband
• Output<Output>
  • Delay
  • Mode
  • OffTime
  • Ontime
  • Pattern
  • Pulse
    • Divider
    • Frequency
• Time
  • Date
  • Time