Phase

SCPI Commands :

[SOURce<HW>]:BB:MCCW:EDIT:CARRier:PHASe:STEP
[SOURce<HW>]:BB:MCCW:EDIT:CARRier:PHASe:[STARt]

Commands in total: 2

Subgroups: 0

Direct child commands: 2

get_start() → float

# [SOURce<HW>]:BB:MCCW:EDIT:CARRier:PHASe:[STARt]
value: float = driver.source.bb.mccw.edit.carrier.phase.get_start()

Sets the power/pahse for the starting carrier. The power of the remaining carriers is stepped up or down by the power specified with the method RsSmw.source.bb.mccw.edit.carrier.power.step() command.

Returns:

start: float Range: -80 to 0

get_step() → float

# [SOURce<HW>]:BB:MCCW:EDIT:CARRier:PHASe:STEP
value: float = driver.source.bb.mccw.edit.carrier.phase.get_step()

For disabled optimization of the crest factor, sets the step width by which the start phase of the carriers in the defined carrier range is incremented.

Returns:

step: float Range: -359.99 to 359.99