Fconfig

SCPI Commands :

[SOURce<HW>]:BB:[LRWPan]:MMS:FCONfig:DLENgth
[SOURce<HW>]:BB:[LRWPan]:MMS:FCONfig:SFDLength
[SOURce<HW>]:BB:[LRWPan]:MMS:FCONfig:SYNLength

Commands in total: 3
Subgroups: 0
Direct child commands: 3

get_dlength() → HrpUwbDeltaLength[source]

# [SOURce<HW>]:BB:[LRWPan]:MMS:FCONfig:DLENgth
value: enums.HrpUwbDeltaLength = driver.source.bb.lrWpan.mms.fconfig.get_dlength()

Sets the delta length. The length depends on the HRP UWB mode and bandwidth.

Returns:: delta_length: DL_4 | DL_16 | DL_64

get_sfd_length() → HrpUwbSfdlEngth[source]

# [SOURce<HW>]:BB:[LRWPan]:MMS:FCONfig:SFDLength
value: enums.HrpUwbSfdlEngth = driver.source.bb.lrWpan.mms.fconfig.get_sfd_length()

Queries the symbol length of the start-of-frame delimiter (SFD) . The SFD length depends on the set SFD symbol sequence, see Table ‘SFD: indices and lengths’. In the mode [:SOURce<hw>]:BB:HUWB:STD OQPSK the SFD length is SFDL_2.

Returns:: sfd_length: SFDL_8 | SFDL_64 | SFDL_2 | SFDL_4 | SFDL_16 | SFDL_32

get_syn_length() → HrpUwbSyncLength[source]

# [SOURce<HW>]:BB:[LRWPan]:MMS:FCONfig:SYNLength
value: enums.HrpUwbSyncLength = driver.source.bb.lrWpan.mms.fconfig.get_syn_length()

Sets the sync length. In the mode [:SOURce<hw>]:BB:HUWB:STD OQPSK the sync length is set automatically, depending on the selected operating band and SFD.

Returns:: sync_length: SL_16 | SL_24 | SL_32 | SL_48 | SL_64 | SL_96 | SL_128 | SL_256 | SL_1024 | SL_4096

set_dlength(delta_length: HrpUwbDeltaLength) → None[source]

# [SOURce<HW>]:BB:[LRWPan]:MMS:FCONfig:DLENgth
driver.source.bb.lrWpan.mms.fconfig.set_dlength(delta_length = enums.HrpUwbDeltaLength.DL_16)

Sets the delta length. The length depends on the HRP UWB mode and bandwidth.

Parameters:: delta_length – DL_4 | DL_16 | DL_64

set_syn_length(sync_length: HrpUwbSyncLength) → None[source]

# [SOURce<HW>]:BB:[LRWPan]:MMS:FCONfig:SYNLength
driver.source.bb.lrWpan.mms.fconfig.set_syn_length(sync_length = enums.HrpUwbSyncLength.SL_1024)

Sets the sync length. In the mode [:SOURce<hw>]:BB:HUWB:STD OQPSK the sync length is set automatically, depending on the selected operating band and SFD.

Parameters:: sync_length – SL_16 | SL_24 | SL_32 | SL_48 | SL_64 | SL_96 | SL_128 | SL_256 | SL_1024 | SL_4096