FilterPy

SCPI Commands :

[SOURce<HW>]:BB:LRWPan:FILTer:OSAMpling
[SOURce<HW>]:BB:LRWPan:FILTer:TYPE
Commands in total: 16
Subgroups: 1
Direct child commands: 2
get_osampling() → HrpUwbOverSampling[source]
# [SOURce<HW>]:BB:LRWPan:FILTer:OSAMpling
value: enums.HrpUwbOverSampling = driver.source.bb.lrWpan.filterPy.get_osampling()

Sets the oversampling factor of the generated waveform. A reduced sample rate saves significantly the amount of memory or allows an increased signal cycle time, and vice versa.

Returns:

oversampling: OS_1 | OS_2 | OS_3 | OS_4 | OS_5 | OS_6 | OS_7 | OS_8 *RST: OS_1 (R&S SMW-K525) / OS_4 (R&S SMW-K527)

get_type_py() → DmFilterHrpUwb[source]
# [SOURce<HW>]:BB:LRWPan:FILTer:TYPE
value: enums.DmFilterHrpUwb = driver.source.bb.lrWpan.filterPy.get_type_py()

Selects the baseband filter type.

Returns:

type_py: RCOSine | COSine | GAUSs | LGAuss | CONE | COF705 | COEQualizer | COFequalizer | C2K3x | APCO25 | SPHase | RECTangle | USER | PGAuss | LPASs | DIRac | ENPShape | EWPShape | LTEFilter | LPASSEVM | APCO25Hcpm | APCO25Lsm | HRP | OQPSK | SENS | CCC0 | CCC2

set_osampling(oversampling: HrpUwbOverSampling) → None[source]
# [SOURce<HW>]:BB:LRWPan:FILTer:OSAMpling
driver.source.bb.lrWpan.filterPy.set_osampling(oversampling = enums.HrpUwbOverSampling.OS_1)

Sets the oversampling factor of the generated waveform. A reduced sample rate saves significantly the amount of memory or allows an increased signal cycle time, and vice versa.

Parameters:

oversampling – OS_1 | OS_2 | OS_3 | OS_4 | OS_5 | OS_6 | OS_7 | OS_8 *RST: OS_1 (R&S SMW-K525) / OS_4 (R&S SMW-K527)

set_type_py(type_py: DmFilterHrpUwb) → None[source]
# [SOURce<HW>]:BB:LRWPan:FILTer:TYPE
driver.source.bb.lrWpan.filterPy.set_type_py(type_py = enums.DmFilterHrpUwb.APCO25)

Selects the baseband filter type.

Parameters:

type_py – RCOSine | COSine | GAUSs | LGAuss | CONE | COF705 | COEQualizer | COFequalizer | C2K3x | APCO25 | SPHase | RECTangle | USER | PGAuss | LPASs | DIRac | ENPShape | EWPShape | LTEFilter | LPASSEVM | APCO25Hcpm | APCO25Lsm | HRP | OQPSK | SENS | CCC0 | CCC2

Cloning the Group

# Create a copy of the original group, that exists independently
filterPy_copy = driver.source.bb.lrWpan.filterPy.clone()

Subgroups