Delay

SCPI Command :

[SOURce]:BB:IMPairment:IQOutput<CH>:DELay
Commands in total: 1
Subgroups: 0
Direct child commands: 1
get(iqConnector=IqConnector.Default) → float[source]
# [SOURce]:BB:IMPairment:IQOutput<CH>:DELay
value: float = driver.source.bb.impairment.iqOutput.delay.get(iqConnector = repcap.IqConnector.Default)

Defines the time delay of both I and Q vectors between the marker signal at the marker outputs relative to the signal generation start. A positive value means that the I and Q vectors delay relative to the marker/trigger and vice versa. Value range Output / Min /s / Max /s / Increment

  • RF<ch> / 0 / 10E-6 / 1E-12

  • FADer<ch> / 0 / 500E-9 / 1E-12

  • IQOutput<ch> / 500E-9 / 500E-9 / 1E-12

  • BBMM<ch> / 500E-9 / 500E-9 / 1E-12

Parameters:

iqConnector – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘IqOutput’)

Returns:

delay: float Range: 0 to 10E-6

set(delay: float, iqConnector=IqConnector.Default) → None[source]
# [SOURce]:BB:IMPairment:IQOutput<CH>:DELay
driver.source.bb.impairment.iqOutput.delay.set(delay = 1.0, iqConnector = repcap.IqConnector.Default)

Defines the time delay of both I and Q vectors between the marker signal at the marker outputs relative to the signal generation start. A positive value means that the I and Q vectors delay relative to the marker/trigger and vice versa. Value range Output / Min /s / Max /s / Increment

  • RF<ch> / 0 / 10E-6 / 1E-12

  • FADer<ch> / 0 / 500E-9 / 1E-12

  • IQOutput<ch> / 500E-9 / 500E-9 / 1E-12

  • BBMM<ch> / 500E-9 / 500E-9 / 1E-12

Parameters:

  • delay – float Range: 0 to 10E-6

  • iqConnector – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘IqOutput’)