Level

SCPI Command :

[SOURce<HW>]:BB:GSM:[FRAMe<DI>]:SLOT<ST0>:[SUBChannel<US>]:[USER<CH>]:LEVel
Commands in total: 1
Subgroups: 0
Direct child commands: 1
get(frameIx=FrameIx.Default, slotNull=SlotNull.Default, subChannel=SubChannel.Default, userIx=UserIx.Default) → GsmBursPowMode[source]
# [SOURce<HW>]:BB:GSM:[FRAMe<DI>]:SLOT<ST0>:[SUBChannel<US>]:[USER<CH>]:LEVel
value: enums.GsmBursPowMode = driver.source.bb.gsm.frame.slot.subChannel.user.level.get(frameIx = repcap.FrameIx.Default, slotNull = repcap.SlotNull.Default, subChannel = repcap.SubChannel.Default, userIx = repcap.UserIx.Default)

The command defines the power control level of the selected slot.

Parameters:

  • frameIx – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Frame’)

  • slotNull – optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Slot’)

  • subChannel – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘SubChannel’)

  • userIx – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘User’)

Returns:

level: OFF | ATT | FULL OFF The slot is inactive. ATT The power is reduced by the amount defined using :BB:GSM:SLOT:ATT. FULL Full power as specified by the level setting.

set(level: GsmBursPowMode, frameIx=FrameIx.Default, slotNull=SlotNull.Default, subChannel=SubChannel.Default, userIx=UserIx.Default) → None[source]
# [SOURce<HW>]:BB:GSM:[FRAMe<DI>]:SLOT<ST0>:[SUBChannel<US>]:[USER<CH>]:LEVel
driver.source.bb.gsm.frame.slot.subChannel.user.level.set(level = enums.GsmBursPowMode.ATT, frameIx = repcap.FrameIx.Default, slotNull = repcap.SlotNull.Default, subChannel = repcap.SubChannel.Default, userIx = repcap.UserIx.Default)

The command defines the power control level of the selected slot.

Parameters:

  • level – OFF | ATT | FULL OFF The slot is inactive. ATT The power is reduced by the amount defined using :BB:GSM:SLOT:ATT. FULL Full power as specified by the level setting.

  • frameIx – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Frame’)

  • slotNull – optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Slot’)

  • subChannel – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘SubChannel’)

  • userIx – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘User’)