Rinex

SCPI Commands :

[SOURce<HW>]:BB:GNSS:SYSTem:SBAS:MSAS:NMESsage:NAV:RINex:PERiod
[SOURce<HW>]:BB:GNSS:SYSTem:SBAS:MSAS:NMESsage:NAV:RINex:STATe
Commands in total: 2
Subgroups: 0
Direct child commands: 2
get_period() → int[source]
# [SOURce<HW>]:BB:GNSS:SYSTem:SBAS:MSAS:NMESsage:NAV:RINex:PERiod
value: int = driver.source.bb.gnss.system.sbas.msas.nmessage.nav.rinex.get_period()

Sets the periodicity of the SBAS message.

Returns:

interval: integer Range: 0 to 999

get_state() → bool[source]
# [SOURce<HW>]:BB:GNSS:SYSTem:SBAS:MSAS:NMESsage:NAV:RINex:STATe
value: bool = driver.source.bb.gnss.system.sbas.msas.nmessage.nav.rinex.get_state()

Enables generation of the particular SBAS correction data.

Returns:

state: 1 | ON | 0| OFF

set_period(interval: int) → None[source]
# [SOURce<HW>]:BB:GNSS:SYSTem:SBAS:MSAS:NMESsage:NAV:RINex:PERiod
driver.source.bb.gnss.system.sbas.msas.nmessage.nav.rinex.set_period(interval = 1)

Sets the periodicity of the SBAS message.

Parameters:

interval – integer Range: 0 to 999

set_state(state: bool) → None[source]
# [SOURce<HW>]:BB:GNSS:SYSTem:SBAS:MSAS:NMESsage:NAV:RINex:STATe
driver.source.bb.gnss.system.sbas.msas.nmessage.nav.rinex.set_state(state = False)

Enables generation of the particular SBAS correction data.

Parameters:

state – 1 | ON | 0| OFF