Profile<Index>#

SCPI Command :

[SOURce<HW>]:BB:GNSS:SVID<CH>:XONA:PRERrors:PROFile<GR>:DELete
Commands in total: 7
Subgroups: 6
Direct child commands: 1

Repeated Capability Setting:

# Range: Nr1 .. Nr64

driver.source.bb.gnss.svid.xona.prErrors.profile.repcap_index_set(repcap.Index.Nr1)
delete ( satelliteSvid=SatelliteSvid.Default, index=Index.Default ) → None
delete_with_opc ( satelliteSvid=SatelliteSvid.Default, index=Index.Default, opc_timeout_ms: int = -1 ) → None
# [SOURce<HW>]:BB:GNSS:SVID<CH>:XONA:PRERrors:PROFile<GR>:DELete
driver.source.bb.gnss.svid.xona.prErrors.profile.delete(satelliteSvid = repcap.SatelliteSvid.Default, index = repcap.Index.Default)
driver.source.bb.gnss.svid.xona.prErrors.profile.delete_with_opc(satelliteSvid = repcap.SatelliteSvid.Default, index = repcap.Index.Default, opc_timeout_ms = 3000)

No help available

delete_with_opc() does the same as delete(), but waits for the operation to complete before continuing further. Use the RsSmw.utilities.opc_timeout to set the timeout value.

Parameters:

  • satelliteSvid – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Svid’)

  • index – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Profile’)

  • opc_timeout_ms – Maximum time to wait in milliseconds, valid only for this call.

Cloning the Group

# Create a copy of the original group, that exists independently
profile_copy = driver.source.bb.gnss.svid.xona.prErrors.profile.clone()

Subgroups